Mock One Productions has brought the exciting world of 1/8th scale R/C Unlimited Hydroplanes to video. We have produced three very informative and action packed videos covering every aspect of the sport from how-to construct, paint and set-up one of these boats, to information on clubs and how the boats race. We also introduce the viewer to many of the sports top drivers and designers.

ORDER FORM

Scale Hydro Construction Part 1
Constructing a 1/8th Scale R/C Unlimited Hydroplane from Plans

VHS Tape $24.95
For the first time on video, witness the detailed construction of a 1/8th scale R/C unlimited hydro plane from scratch. In this 75 minute video, you'll see scale hydro racer Don Mock build a model of the 1982 Atlas Van Lines*. See the step-by-step process as Don discusses plans, building materials, tools and glues. Follow the initial frame-up, bottom and non-trips, sponsons and decking. Next the engine well, radio box and motor mount are added. Don then takes you through the construction process of the fiberglass/carbon fiber cowling and wings for the boat. From completing the "plugs", to making the molds, and finally laying up the finished parts. Watch as the boat is primered and readied for paint. Don offers numerous construction ideas and tips on everything from gluing, body fillers, sanding and shaping to waterproofing and keeping the hull light. Whether you are a novice or an experienced modeler, this "how-to" video will show you that constructing a scale hydro is an enjoyable project and easier than you might think!

(*The Atlas Van Lines model built in this video series went on to win 4 races and the R/C Unlimiteds High Point Championship in 1993.)

ORDER FORM

Scale Hydro Construction Part 2
Hardware Installation, Painting, Detailing and Competitive Set-Up of a 1/8th Scale R/C Unlimited Hydroplane.
VHS Tape $24.95

In this 90 minute video, scale hydro racer Don Mock takes you step-by-step through the installation of the engine, running hardware and radio gear in his 1982 Atlas Van Lines* model. The boat, which was constructed from plans in Part 1, is now painted, detailed and set up to race. We'll then go to the race course to see the boat run in its initial test session. You'll also learn what it takes to complete a factory fiber glass hull including ideas on fuel tank location, motor mounts and radio boxes. We'll meet renowned unlimited designer Ron Jones as he describes his 1/8 scale fiberglass sponsons and see the modular construction of a 1991 Miss Budweiser model using these "Jones" sponsons. We visit with scale hydro "Czar" Roger Newton as he discusses props, drive shafts, skid fin and rudder set-up and much more. The special section on painting includes tips on hull preparation, masking, lettering and graphics. And to put the "scale" into scale hydros we'll look at mini drivers, helmets, steering wheels, dashboards and more. And of course you'll get a up close look at the

engine and hard ware layout in some of the Northwest's winningest boats. And finally we'll go to Seattle's Kingdome for an exciting wrap-up of the 1991 Mini Gold Cup. So whether you're constructing a scratch built, commercial kit or fiberglass 1/8 scale unlimited, this video can help you get on the water fast and with more success in competition or just for fun!

(*The Atlas Van Lines model built in this video series went on to win 4 races and the R/C Unlimiteds High Point Championship in 1993.)

ORDER FORM

Scale Hydro Racing
Welcome to the exciting world of 1/8th scale R/C Unlimited Hydroplanes!
VHS Tape $19.95

Capable of speeds over 60 miles per hour, these model hydros are exact replicas of unlimited hydroplanes, the world's fastest and most spectacular race boats. The mini hydros are nearly 4 feet long and 2 feet wide and are powered by water-cooled two-cycle racing engines capable of developing over four horse-power at nearly 25,000 rpm. In this one hour video we'll look at how these boats are built and race. You'll meet top designer, and the sports founder, Roger Newton as he explains scratch building from plans. Get a close-up look at the amazing scale detail work and paint jobs on some prize-winning hydros. We'll go to Seattle's Kingdome and experience the wild racing action on the world's first man-made course built for 1/8th scale hydroplanes. Learn about clubs that race these boats and find out how to enter the sport. See incredible slo-motion footage of some of the fastest scale hydros as the literally fly across the water and experience the heat of competition with thrills, spills and flips!

ORDER FORM